How to Bypass Ford Pats System without Key
If you have ever lost your spare key, know how to disable Ford’s pats system. For example, nothing is more irritating than misplacing your transponder key and being unable to start your vehicle.
Don’t panic if you would not want to invest cash for a new transponder key or don’t need to bother setting one up; we’ve shared how to bypass ford pats system without key. So without ado, let’s get begin;
A complete guide on how to bypass ford pats system without key
When you walk up towards where you initially parked your car, and it is nowhere to be seen, it would be the worst experience. Car theft has been a serious issue for a long time, and car manufacturers have tried various solutions to prevent it.
PATS is the most widely used security system. Pats is a feature that automatically identifies if you have the genuine key or a cheaper key from Walmart to start it up. In 1996, the technology started to produce its entry into Ford automobiles.
Following that, the technology was installed in many Ford automobiles.
When you lose your original key, you lose access to your vehicle. You can open the doors, but no matter how many times you turn the key with the on state, the engine will not start.
Therefore, as much as you have the original key, you may set up a new transponder key; the procedure is not nearly as complicated, and you will do it yourself with FORScan. If you do not even want to do it yourself, you can contact a dealer and have a fresh transponder key set for you.
Do you feel helpless now that you’ve misplaced the main key? But don’t be concerned. We’ll explain the process required to get around Ford’s pats system.
As we begin, keep in mind that the measures below should not be considered a sustainable solution because they will leave your automobile vulnerable to car thieves.
You can only use this method until you receive a new transponder key from Ford. Assuming that we’re on the same path, take the procedures below to bypass Ford’s pats system:
What You’ll Require
Before we get started, there are some things you should know about how to go around the system. The components mentioned below will allow you to take advantage of the pats system, so help ensure you have them all before continuing with the rest of the article.
- A flathead screwdriver can be used to gain access to the inside of the key. Everything with a good straight edge would suffice if you did not have a screwdriver.
- Please obtain a new set of keys that are cut to match the originals.
- Tape – once you’ve extracted the transponder from the real key, you’ll require tape to hang it.
How might I find how to bypass the Ford pats system by disabling it? The first step is to take the keys to a local dealer and cut them.
The replacement keys will resemble the old key because they were cut. It allows you to safely insert the key into the ignition and start the vehicle. You won’t even need the chipped key to start the automobile.
The keys will not be programmed. We’ll utilize the new keys to fool the system into thinking you’re starting the car with the transponder key. Have more on this below.
But, for the time being, if you wish to use the keys, help ensure they’re cut.
After you’ve cut the keys, you’ll need to take the chip out of the transponder. The chip in the key informs the car that you are the owner of the original key and have entrance to the vehicle. You won’t be ready to start the car without such a chip, which is exactly what we’re trying to avoid.
In this article, we have shared how to bypass ford pats system without key. However, it takes a few tries to find the proper position for the transponder, but don’t get disappointed if you don’t even get it right away. You may set off the theft light a few times during the process, but you must persevere until you select the optimal location for the chip.
Read More: How to change game settings in among us